CSMC3
Features:
SMD Ceramic 3.5mm x 6mm (2 Pad)
Wide Frequency Range
Tight Tolerance and Stability
RoHS Compliant
Electrical Specifications
| Frequency Range | 7.000MHz to 100.000MHz |
| Frequency Tolerance/Stability | See ordering options below |
| Operating Temperature Range | See ordering options below |
| Storage Temperature Range | -40°C to 85°C |
| Aging | ±3ppm per year Maximum |
| Shunt Capacitance | 5pF Maximum |
| Load Capacitance | See ordering options below |
| Mode of Operation | |
| Capacitance Ratio | |
| Quality Factor | |
| Equivalent Series Resistance | |
| Mode of Operation | Fundamental and 3rd Overtone |
| Drive Level | 100 µWatts Maximum |
| Insulation Resistance | 500 Megaohms Minimum at 100Vdc |
| Spurious Response | -3dB Minimum: Fo to Fo +5000ppm |
| Termination Finish |
Equivalent Series Resistance Table
| Frequency Range | ESR(ohms) | Mode / Cut |
|---|---|---|
| 7.000MHz to 11.900MHz | 100 Maximum | Fundamental / AT |
| 12.000MHz to 13.900MHz | 60 Maximum | Fundamental / AT |
| 14.000MHz to 54.000MHz | 40 Maximum | Fundamental / AT |
| 40.000MHz to 100.000MHz | 80 Max | 3rd Overtone / AT |
Mechanical Dimensions
Part Numbering Guide
Environmental Specifications
| Fine Leak Test | MIL-STD-883, Method 1014, Condition A |
| Gross Leak Test | MIL-STD-883, Method 1014, Condition C |
| Mechanical Shock | MIL-STD-883, Method 1004 |
| Flammability | UL94-V0 |
| Moisture Resistance | MIL-STD-883, Method 1004 |
| Moisture Sensitivity | J-STD-020, MSL 1 |
| Resistance to Soldering Heat | MIL-STD-202, Method 210, Condition K |
| Resistance to Solvents | MIL-STD-202, Method 215 |
| Solderability | MIL-STD-883, Method 2003 |
| ESD Susceptibility | MIL-STD-883, Method 3015, Class 1, HBM: 1500V |
| Temperature Cycling | MIL-STD-883, Method 1010, Condition B |
| Vibration | MIL-STD-883, Method 2007, Condition A |
Add Your Part Number to a Quote
Options for adding Part Numbers to your quote:
Option 1: You can create additional Part Numbers using the Part Number Constructor form. Once a Part Number is created, it can then be added to your quote request by clicking the “Add to Quote” button. You may use this form as many times as needed and each submission will be saved to your quote.
Option 2: If you already know your Part Numbers, you may add them using the Add to Quote by Part Number simplified form.