TFS23C
Features:
5.0 Volt (VC)TCXO
CMOS Output
Custom Frequencies Available
Stability Down to ±1ppm
Electrical Specifications
| Frequency range | 5.000MHz to 52.000MHz | |
| Temperature Stability | Frequency Tolerance @25°C vs. Temp vs. Aging vs. Voltage (with a 5% change) vs. Load (with a 10% change) | ±2.0ppm Choose from available options ±1ppm per year max. ±0.05ppm ±0.05ppm |
| VDD Sensitivity | ||
| Operating Temperature Range | Choose from available options | |
| Storage Temperature Range | -55°C to +125°C | |
| Supply Voltage (VDD) | ±5% | 3.3VDC |
| Supply Current | 3.5mA Maximum | |
| Warm-up Time | ||
| Power Consumption | ||
| Output Voltage HCMOS | ||
| Output Voltage Logic High (VOH) | ||
| Output Voltage Logic Low (VOL) | ||
| Duty Cycle | ||
| Load Drive Capability | 10kOhms // 10pF | |
| Rise/Fall Time | ||
| Control Voltage Range | VDD = 3.3V | 1.65VDC ±1.5VDC |
| Transfer Function | Positive Transfer Characteristic | |
| Input Impedance | 100kOhms Minimum | |
| Linearity | ||
| Pullability | VC Option | ±5ppm |
| Output Type | Clipped Sinewave | |
| Output Voltage | 0.8Vp-p | |
| Start Up Time | ||
| Standby Current | ||
| RMS Phase Jitter | ||
| Phase Noise | at 12.800MHz | -130dBc/Hz at offset of 100Hz -145dBc/Hz at offset of 1kHz -154dBc/Hz at offset of 10kHz |
| Tristate Function | ||
| Pad 1 Connection | VC or No Connect | Choose from available options |
| Mechanical Trim | ||
| Aging | ||
| Tune Port Input Impedance | ||
| Tune Port Input Modulation Bandwidth | ||
| Differential Output (VOD) | ||
| Output Offset Voltage (VOS) | ||
| Differential Output Error (dVOS) | ||
| Crystal Cut |
Mechanical Dimensions
Part Numbering Guide
Environmental Specifications
| Fine Leak Test | MIL-STD-883, Method 1014, Condition A |
| Gross Leak Test | MIL-STD-883, Method 1014, Condition C |
| Mechanical Shock | MIL-STD-883, Method 1004 |
| Flammability | UL94-V0 |
| Moisture Resistance | MIL-STD-883, Method 1004 |
| Moisture Sensitivity | J-STD-020, MSL 1 |
| Resistance to Soldering Heat | MIL-STD-202, Method 210, Condition K |
| Resistance to Solvents | MIL-STD-202, Method 215 |
| Solderability | MIL-STD-883, Method 2003 |
| ESD Susceptibility | MIL-STD-883, Method 3015, Class 1, HBM: 1500V |
| Temperature Cycling | MIL-STD-883, Method 1010, Condition B |
| Vibration | MIL-STD-883, Method 2007, Condition A |
| Soldering Temp | |
| Hermeticity of Seal |
Add Your Part Number to a Quote
Options for adding Part Numbers to your quote:
Option 1: You can create additional Part Numbers using the Part Number Constructor form. Once a Part Number is created, it can then be added to your quote request by clicking the “Add to Quote” button. You may use this form as many times as needed and each submission will be saved to your quote.
Option 2: If you already know your Part Numbers, you may add them using the Add to Quote by Part Number simplified form.